Stainless steel braided brake lines to fit Tesla Model 3/Y (all models).

Set of two front and two rear replacement lines with bolts and washers. These lines replace the factory fitted rubber hoses and will give you a much firmer pedal feel. Highly recommended for track use but also very worthwhile for road use. 

These hoses utilise the highest quality fittings and are made in the UK by a company specialising in high pressure hoses and fittings for road and motorsport applications. All fittings are stainless steel. Hoses are made with Stainless Steel fittings swaged to clear PVC covered s/s braided TFE hose.

Use these brake lines in conjunction with our master cylinder bracket and you'll notice a significant improvement in brake pedal feel.

Please Note: Intended to provide a hard feel and reduced travel to the brake pedal, this is achieved due to the lower volume of expansion under pressure achievable in this construction. They are also lighter than conventional hoses and more resistant to stone damage.  Care must be taken in fitting to ensure that the hoses do not contact any moving part under conditions of extreme suspension travel and/or full steering lock. No responsibility can be taken for any damage, injury or loss resulting from their use.