Be the first to review this product.
Redwood Motorsports Model 3 Anti Roll/Sway Bars - Front and Rear Set
* Due to high demand we are currently out of stock. More expected late April/early May. You can pre-order now with a £120 deposit to ensure you're allocated a set when we receive our next shipment *
Set of front and rear anti roll bars to fit the Tesla Model 3
Complete with new uprated rear bushes and brackets. Clamp on limiters supplied to prevent rear bar from moving laterally. Optional grease fittings included which allow mounts to be lubricated in service without having to unbolt the brackets.
Anti roll bars are a cost-effective upgrade especially suited to cars without any other modifications and will reduce body roll without compromising ride quality.
Fitting is very straightforward and should take less than an hour. No special tools are needed and the car's alignment will not be affected.
Redwood ARBs are superbly engineered and manufactured from one hollow bar. Bars made with welded ends can crack or even fail completely due to hot spots and stress points in the weld. These bars will last the lifetime of the car.
32mm diameter (factory M3P bar is 29mm)
3 stiffness settings
22mm diameter (factory M3P bar is 19.6mm)
2 stiffness settings
For even more control and refinement, add adjustable end links.
Note: Model 3 SR and SR+ models are not fitted with a rear ARB from the factory. You will need to order these parts from a Tesla service centre in order to fit the Redwood ARB to these cars:
4 x Flange Bolts - 4 x M10 1.5X23 - p/n 1111154-00-B
4 x Nuts NUT,HF,M10x1.25 - p/n 1111542-00-A
OEM End links - p/n 1044491-00-E (Rear Left) 1044496-00-E (Rear Right.)
(The nuts and end links will not be required if you are ordering the uprated Model 3 rear end links from Tevo)
Download the installation guide here: